Is it any wonder folks new to hi-fi go nuts over old gear like this? Those of us who’ve been around a while probably just love it anyway. This Classic 45 year old vintage Sony hi-fi system just came in for it’s first service – in 45 years…!

And guess what – this beautiful Sony hi-fi system now works perfectly again, after service. Have you ever seen a more beautiful, basic hi-fi system?

I know there’s a lot of great looking gear out there, but this stuff is just stunning, and it was Sony’s affordable equipment. In many ways it reminds me of the classic Philips RH-750 receiver I wrote about, this time last year. Stylish, distinctive, and affordable.

img 3369

In this Sony hi-fi system we have a lovely TA-1150D amplifier and TC-204SD cassette deck. Both pieces came in with their original owner, for their first service in 45 years. That’s right – 45 years! How much new electronics do you think will be working 45 years from now..? Plasma tv’s anyone..? Bueller… Bueller?!

img 3370

Sure, these two components needed a little TLC, you’d expect that at 45 years I think. Fundamentally though, both are close to perfect and will provide their owners with many more years listening pleasure.

img 3372

Sony TA-1150D Integrated Amplifier

What a cracker of an amplifier. Beautifully made, this little gem puts out a modest 30 Watts per channel. I’m not talking inflated bass and hi-fi sugar that capture the attention of hi-fi newbs. This is a sweet, realistic sounding little amp that is happy driving simple speakers all day long.

In terms of faults, this one was operating with only one channel when she arrived. That was easily resolved.

Specifications (courtesy HiFi Engine)

Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 15Hz to 80kHz
Total harmonic distortion: 0.1%
Damping factor: 100
Input sensitivity: 2mV (MM), 140mV (line)
Signal to noise ratio: 70dB (MM), 90dB (line)
Output: 140mV (line), 24mV (DIN), 0.8V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 26 x transistors, 3 x diodes, 2 x IC
Dimensions: 400 x 149 x 316mm
Weight: 8.3kg
Year: 1973

img 3376
What a little gem
img 3374
Looking inside, everything is covered in a thick layer of dust. This is responsible for some of the control issues with the unit. Check out the dinky little TO-220 package output devices, a sure sign this is a low-power model. Normally TO-220 sized devices are used as drivers in bigger amps, but back in the day, it was quite common to see them in low power amps used as output devices.
img 3375
Dusty transformer
img 3377
Much better after cleaning with high-pressure air
img 3378
Time to service the front panel switches and rotary controls. Little TC-204SD is visible in the background.
img 3379
Every capacitor is original and working well enough. This unit only came in for a service/repair, not an overhaul. Wiring is carefully done and neat. Front panel folds down, allowing access to controls for service.
img 3380
Time for technical testing and adjustment
img 3381
Setting bias current and yes, need to tidy my work bench…
img 3383
Here she is, finished and cleaned!
img 3384
Wow
img 3385
Don’t tell me you wouldn’t like one of these little gems…

Sony TC-204SD Cassette Deck

This is another beautifully made piece, mechanically excellent after 45 years, but needing service. The mechanical build quality of even this simple deck can be seen in her 8kg mass. It’s almost entirely metal, basic decks from the end of the 90’s weigh in at less than half that. Oh yeah, and many of them don’t work anymore. This one does.

In terms of faults, this unit presented with a very strangely behaving meter. Again, this was relatively easily resolved.

Specifications (courtesy HiFi Engine)

Type: 2-head, single compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.8 cm/s
Heads: 1 x record/playback, 1 x erase
Tape Type: type I, CrO2, FeCr
Noise Reduction: B
Frequency Response: 20Hz to 16kHz  (FeCr tape)
Signal to Noise Ratio: 64dB  (dolby B)
Wow and Flutter: 0.09%
Total Harmonic Distortion: 1.7%
Input: 60mV (line), 0.2mV (mic)
Output: 0.775V (line)
Dimensions: 430 x 160 x 325mm
Weight: 8kg
Year: 1975

img 3386
The deck is original, with a couple of small issues. The mechanism needed lubrication, tape path needed cleaning and demagnetisation and the rec/playback main switch needed attention.
img 3387
She needed a lubrication of some critical points, some tape path maintenance and some attention to front panel switches, rotary controls and board mounted switches.
img 3388
Love my restored TDK HD-01 tape head demagnetizer cassette. Thanks Pierre @ Revolution Turntable for that one!

The Finished System

Finishing both pieces involved testing, adjustment and of course cleaning which many of you will know by now I take great pleasure in doing.

img 3391
Here we see both cleaned and serviced components, stacked as they probably are in the owners home and perhaps as Sony had them in catalogs at the time.

img 3390

If I can assist in any way with your classic Sony hi-fi equipment, or any other for that matter, don’t hesitate to get in touch.

Thanks for visiting! Comment, like, share, subscribe. Be respectful and no advertising please. Our advisory service is available via the contact page.

Discover more from LiQUiD AUDiO

Subscribe now to keep reading and get access to the full archive.

Continue reading

Scroll to Top