Gorgeous Realistic STA-2000 Receiver Repair & Service

Wow, take a look at this old girl, this Realistic STA-2000 is definitely one of the prettiest receivers I’ve had the pleasure of working on.

The Realistic STA-2000 sold here in Australia through the Tandy Electronics chain, in the late 70’s. As a kid, I used to visit the Tandy store near my home and marvel at all the wonderful electronics for sale. One of my favourite toys was a beloved Science Fair 200-in-1 electronics kit Mum and Dad gave me for Christmas, from Tandy Electronics.

I was especially interested in Tandy’s hi-fi section (you’d never have guessed, right..?). I had a small pair Realistic speakers and lusted after the legendary Mach One speakers on proud display at my local store, probably not far away from this old girl.

The STA-2000 has a distinctly Pioneer vibe, but there’s more to it than that. Tandy never made their own stuff, so one of the major Japanese manufacturers made this and other models for them.

Well, thanks to Norman, one of my American readers who used to work for Tandy Corporation in Dallas, we can now reveal that this model was made by Foster, in Japan. Foster are a famous Japanese OEM who made lots of speakers, radios and it turns out, receivers for Tandy and others. You can read Norman’s contribution in the comments below.

Specifications, thanks to HiFi Engine:

Tuning range: FM, MW
Power output: 75 watts per channel into 8Ω (stereo)
Frequency response: 15Hz to 25kHz
Total harmonic distortion: 0.25%
Signal to noise ratio: 70dB (MM), 75dB (line)
Dimensions: 19.25 x 16.5 x 6.25 inches
Finish: silver front, walnut veneer side panels
Year: 1977
Price: USD $499.95 (1978) = USD $2118 in 2018!

Service & Repair

This STA-2000 arrived with a broken left channel, stiff tuning and looking a little dull. I replaced a noisy transistor differential pair using high-spec parts, similar in performance, but with a much higher voltage rating. These won’t fail again and I’m happy to report the unit is now singing again and back with her happy owner.

Let’s take a look and check out some of the extra little things I do when working on vintage hi-fi gear to add value.

Let’s go!
Nice spacious layout in older gear like this makes it a pleasure to work on.
Realistic quality, love it!
Two amplifier modules, top left, generous transformer top right. Middle left is the phono pre, next to it some power and protection stuff, next to it the filter capacitors. Bottom left is the RF front end, and next to it, the tuner board. There’s some power and preamp stuff hidden underneath.
Slightly fiddly to remove the module and separate the board and heatsink, but it’s well-designed overall.
Out with that noisy differential pair.
This pair of transistors was the problem. They tested well, but one or both were noisy. Testing doesn’t always show up bad parts, that’s where diagnostics on a running unit come in.
New transistor pair in place and time to adjust DC offset and do a few other service-related things.
Like lubricating the many moving parts in the tuning mechanism, switches and controls. This work makes all the difference – prior to lubrication the tuning for example was stiff and noisy, now it’s buttery-smooth and spins for ages.
Cleaning and waxing these walnut side panels really enhances the appearance of vintage gear like this. Few other repairers take the time to do these little things, but they really make a difference.
I start with a wood cleaning solution designed to remove crud and nourish the wood.
Much better already, next step involves beeswax furniture polish…
After rubbing the wax in and buffing off, the rich lustre has returned.
I’m very happy with this, they used really nice veneer on this unit.


Final work on this unit involves cleaning the fascia and knobs and putting those gorgeous side panels back on. That’s the job done.

Lovely looking piece, my customer is very lucky to own her.

Stunning dial illumination. Don’t anyone try and tell me modern gear looks better than this.

Nice metering on the STA-2000 also.
They really don’t make radios like they used to. There’s something tactile about weighted tuning and illuminated dials that creates a feeling of magic with older gear like this.

If you see one of these for sale, please just buy it, or at least tell me about it so I can!

Get in touch if you live in Perth and would like me to take a look at your vintage receiver.

6 thoughts on “Gorgeous Realistic STA-2000 Receiver Repair & Service”

  1. Wow, definitely a ‘Pioneer’ look to that one and check out the triple gang tuner, they don’t make them like that any more…nice one

    1. Hi Mal, thanks for commenting and I hope all is well. I agree 100%, this unit represents everything I think we all love about vintage gear like this. There’s just something great about it and the fact that it can be easily serviced and repaired, all these years later.

  2. Mike,
    Foster Electric now Foster/Fostex manufactured those for Tandy. I worked with Tandy for years. Quality was first rate. Each of my two sons use the STA-2000. They have functioned now for over 40 years without even one issue. Thinking of my personal extensive audio collection, that is not something I cannot say about too many pieces I have owned over the years.
    The original STA-2000 are the ones to have. Later production was moved to Taiwan and Singapore using third party manufacturing. Quality then suffered somewhat. Those built in Japan directly by Foster are stellar!

    1. Hi Norman, thanks so much for stopping by and for commenting. I knew Foster OEM’ed speakers, speaker drivers and even radios for Tandy, but I wasn’t aware they made these receivers as well. Having said that, I guess it’s not a big stretch from radios to receivers. Is it verified somewhere that Foster made these units? Fascinating stuff and thank you very much for the insight!

  3. Mike,
    I really dont know how we’ll known it is. I knew from working with Tandy coroporate in Dallas. I believe that Foster also built the Stereotech 1200 line for McIntosh around the same time. That should give you an indication of their quality control.

    So many used to think that Pioneer built these because of the silver face look.

    For what it’s worth, Sansui actually built the Realistic STA-90, and Telefinken did one too but I can’t remember which.


    1. Fascinating stuff Norman, thanks for the additional information. I’ll update the article now to include what you’ve mentioned here. The Pioneer link is often suggested due the silver faceplate and much more than that. The knobs and switches are very similar and the wooden side panels, meters and other styling cues in the faceplate are remarkably Pioneer-like. Who knows, perhaps Foster made parts like these for Pioneer, I wouldn’t be at all surprised. I’ve just updated the article to reflect your input, thanks again Norman!

Hi, thanks for stopping by, leave a comment and share your thoughts!