img 6473

Sold Equipment Gallery Page 2

Sold Equipment Gallery Page 2

Page 1, Page 3


Denon DRW-580 Dual Cassette deck

This is a cheap and cheerful dual auto-reverse machine featuring VFD metering, Dolby B-C-HX Pro and all functions working well.

UPDATE: SOLD!

img 0309

img 0306

img 0308

img 0307

This Denon cassette deck plays tapes well and is a great starter machine or second deck for non-critical applications. Yours for just $150.


Lovely AIWA M450 Cassette Deck

Here we have another lovely cassette deck for sale, this time an AIWA M450.

UPDATE: Sold!

img 9336

This beautiful old deck features proper analog VU meters for monitoring record and playback levels, metal tape capability and Dolby noise reduction.

Soft-touch controls once again feature on this machine making deck operation a breeze. She is also very solidly built, not quite as heavy as the Akai I recently sold, but solid nonetheless.

Everything works, she’s had a full inspection and test, tape path clean and demagnetisation and she can be yours for just $200.

img 9337

img 9338

img 9342 1

img 9339

img 9342

img 9340

img 9341


Superb Akai GX-F37 Cassette Deck

UPDATE: Sold!

Look at this gorgeous Akai GX-F37 cassette deck. This is one from the golden era of cassettes, before CD and before the build quality went downhill, so it’s really heavy and well-built.

img 9181

The deck features soft-touch controls, fluorescent meters and all the usual features one gets with quality older machines like this.

img 9177

Specifications

Type: 2-head, single compact cassette deck
Track System: 4-track, 2-channel stereo
Tape Speed: 4.76 cm/s
Heads: 1 x record/playback, 1 x erase
Motor: 1 x DC servo, 1 x DC
Tape Type: type I, CrO2, Metal
Noise Reduction: B, High Com
Frequency Response: 30Hz to 19kHz  (Metal tape)
Signal to Noise Ratio: 80dB  (High Com)
Wow and Flutter: 0.04%
Total Harmonic Distortion: 0.7%
Input: 70mV (line), 0.25mV (mic)
Output: 0.41V (line)
Dimensions: 440 x 118 x 285mm
Weight: 6.9kg

Recently serviced and tested, she runs very nicely and can be yours for just $295.

img 9180

img 9178

img 9179

img 9182


Ortofon LH-6000 Magnesium Headshell

Newly listed, this lovely Ortofon LH-6000 headshell, from my personal collection.

UPDATE: SOLD!

These currently retail for $189 AUD. This headshell is in almost perfect original condition (wires may not be original) and can be yours for just $115.

The LH-6000 is a gorgeous, magnesium headshell, designed especially for the Cadenza, Jubilee, Kontrapunkt and Windfeld series cartridges. It can be used with others of course, too. This is a serious headshell, beautifully machined and finished in satin black. I previously used this LH-6000 with my Ortofon MC Jubilee.

    • Universal mount
    • Magnesium
    • Weight – 13.5 grams
    • Mounting distance – min 37.2 mm, max 42.5 mm

img 8482

img 8484

img 8483

img 8486

img 8485


Audio Technica AT-LH13/OCC Headshell

UPDATE: SOLD!

This is a superb quality Japanese headshell, in like-new condition, with box and headshell wires.

Very hard to find here in Australia and made in Japan, this lovely Audio Technica headshell comes complete with oxygen-free copper AT6101 headshell wires. The wires alone sell for $35!

Purchased from Japan, these typically cost around $175 with shipping and customs. This pristine example can be yours for just $95.

for sale

  • 13g adjustable headshell manufactured from TechniHard™
  • Adjustable overhang and azimuth
  • Threaded headshell avoids use of nuts when fitting cartridge
  • Supplied with PCOCC wires

The AT-LH13/OCC is a 13g adjustable headshell manufactured from TechniHard™ material, complete with AT6101 headshell wires. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal threads to avoid the use of nuts when fitting cartridges.

img 8456

img 8453

img 8455

img 8454

img 8452


Gorgeous Ortofon LH-9000 headshell

This is the best adjustable overhang headshell Ortofon makes and one of the best available, period. It has a retail price of 189 EURO. Comes with its original box and headshell wires. Like new and a silly price of just $125.

UPDATE: SOLD!

for sale

  • Universal mount
  • Magnesium with carbon fibre
  • Weight – 16.8 grams
  • Mounting distance – min 38 mm, max 46 mm
  • High Purity Copper headshell leads (LW-7N) included

for sale


Just in, this lovely Technics SL-23 belt-drive turntable, fully serviced and ready to go.

UPDATE: SOLD!

Yes, the Technics SL-23 belt-drive deck is one of the best sensibly-priced belt-drive decks from the golden era. In fact, people love these decks so much that they have a near-perfect 5-star rating on Vinyl Engine.

The SL-23 has a very well-deserved reputation for great performance and long-term reliability. Owners past and present speak of them with such enthusiasm that it’s hard not to love these decks for those reasons alone.

Check out the rave reviews on the SL-23, plus my article on the deck, if you are interested.

img 6548

This Technics SL-23 is a winner, freshly serviced, detailed and ready to play vinyl. She received a proper Liquid Audio service, including:

  • New premium rubber drive belt (not eBay rubbish)
  • New Japanese stylus
  • Clean and detail
  • Mechanical and electronic service
  • Spindle bearing service
  • Motor service
  • New & upgraded RCA cable

Everything has been done properly, to factory standards. The deck comes with her original Technics cartridge and performs like new.

img 6554

You’re looking at just $495 for this little gem, ready to go, with nothing to spend. She’s just received $300 worth of work and parts and comes with a 3-month warranty. This is, of course, a very different scenario to buying a rundown SL-23 off eBay or Gumtree and then having to pay to have proper service work done anyway.

img 6555 e1573117438974

img 6553

If you compare what around $500 gets you new, well, it’s all just rubbish. This is a proper Japanese hi-fi turntable from one of the great manufacturers. She provides really great performance and smashes new decks at this price and considerably more. There is also literally nothing to spend until your next stylus.

img 6550

This lovely SL-23 is an orphan and very much deserving of a caring new owner. She would make a great first ‘proper’ hi-fi turntable for someone.

You’ll love this one!

img 6551


For sale – my beloved Kenwood KD-600, from my personal collection!

I’ve been working on a secret project here @ Liquid Audio, a statement, end-game turntable resurrection. That project is now complete, details to follow, but because of this, my treasured KD-600 has to go.

UPDATE: SOLD within a day, to a very happy new owner!

Yes, my Kenwood KD-600 is for sale and yes, this is a super-rare opportunity to grab a highly sought-after and legendary vinyl spinner. It’s hard for me to believe too, but I only need one turntable and I have three tying up serious funds, so it’s a case of needing to rationalise.

img 6472

This gorgeous Kenwood KD-600 has been a part of my personal collection for 15 years. She’s played some amazing vinyl and never let me down. I’m genuinely sad to see her go, but she needs a new home. I have an idea where she might end up…

img 6473

Key Features

It goes without saying that this superb deck is in pristine, collectors’ condition. She features a gorgeous Jelco SA-750D tonearm ($1000), custom arm board made by yours truly, Jelco JAC-502 (Mogami) tonearm cable ($200+) and genuine Kenwood metal hinges, as opposed to the factory plastic ones.

My KD-600 is an unmarked, locally delivered Australian 240V unit. She plays records superbly and the combination of the Jelco arm and heavy ARCB chassis delivers what’s on the record, without the extra flavour that some seem to like, but that isn’t meant to be there!

In terms of maintenance, I’ve owned this deck for nearly 15 years so she’s impeccably maintained and recently serviced. She won’t disappoint.

KD-600
Genuine Kenwood metal hinges I imported from the US of A!
KD-600
The Kenwood touch sensor is one of the most beautiful aesthetic and tactile elements of the KD-600.
Jelco
That’s $200 AUD of premium Jelco (Mogami) tonearm cable
img 6486
The Jelco HS-25 headshell with Ortofon MC 15 Super II moving coil cartridge and genuine Jelco mounting hardware. I can install whatever cartridge your heart desires!

I’ve written about these very special decks many times over the years, so check this review, this previously sold beauty, this on my turntable and this service for more on what is certainly one of my favourite serious but not silly Japanese turntables.

I’ve had strong interest in this deck, so it will go quickly. Local buyers preferred, priced at around $2500 AUD.

UDPATE: SOLD!!

img 6495

Jelco HS-25
The Jelco HS-25 magnesium headshell is one of my favourite headshells for sensible money. Just beautifully made.
KD-600
Farewell, my old girl…

img 6497

Jelco SA-750D
Jelco tonearm and headshell boxes included, just leave my tools and equipment!

WOW! Rare Kenwood KD-650 Direct Drive Turntable. Multi-Voltage, Restored, $1750 AUD.

UPDATE – Sold in less than 24 hours to a very lucky new owner!

Turntable lovers, take a look at this. Here is a rare opportunity to purchase this stunning Kenwood KD-650 direct-drive turntable. These decks almost never come up for sale, but this restored and serviced KD-650, in superb original condition, is ready for her next owner to enjoy.

img 5553

The KD-650 is 15kg of metal, synthetic concrete, acrylic and computer-controlled motor. She plays records superbly, as one would expect of a deck like this from the golden era.

Of course, sonically and build-wise, it crushes new decks at this price point and above. It also has real vintage audio cred and sonic goodness that new stuff will never have.

Decks like this KD-650 make modern gear look lame to be brutally honest. There will come a time when you won’t be able to buy a KD-600 or KD-650 for any less than 5K, but in the meantime, thank goodness we still can.

img 5552

I recently overhauled and serviced this machine, installed new lighting in the power/locked indicator, replaced all the small control board capacitors, serviced the motor and just installed a brand new Rega Carbon cartridge to ready the deck for sale. The cartridge has zero hours use.

img 5554

This deck is ready to play records. Any cartridge can, of course, be supplied and installed at the purchaser’s request.

img 5560

The owner of this gorgeous deck has a genuine reason for sale. He just purchased an even better (and much more expensive) turntable and can’t justify keeping both. His loss, your gain!

img 5555

Note that whilst the arm lifter lowers the arm nicely, it returns to the lowered position by itself. I just added some fresh silicone damping oil though and it’s behaviour has improved.

img 5557
Arm lifter plus arm height adjustment.
img 5561
Yep, rare dual 120V / 240V operation on this one.

International shipping is possible, though expensive. I’d factor in $500+AUD insured shipping to Europe or North America. To avoid any risk of damage, a local sale is very much preferred.

img 5559

img 5558

img 5578
As sold, after fitment with gorgeous AT-OC9 mk3 moving coil cartridge.

If you have queries or questions about this beautiful deck, let me know.


Pro-Ject Puck Record Clamp

Just in, one perfect and as-new Pro-Ject Puck record clamp.

This is a very well-made, mass-based record clamp. They are a fantastic addition for turntables that can handle the 750g additional mass.

img 5078

img 5076

img 5077

img 5079

RRP is $99, this one is perfect in every way and can be yours for $75.


Musical Fidelity M1 DAC – Upgraded by Liquid Audio – for sale on consignment – $595.

Update: SOLD, to a second very happy owner!

Just in, this gorgeous Musical Fidelity M1 DAC. I sold this about 6 months ago to a regular customer who absolutely loves it. He’s just purchased an even better DAC from me though, my stunning, upgraded Musical Fidelity TriVista 21, so the M1 is for sale here, on consignment.

My customer told me this upgraded M1 easily beat his Yamaha CD-S1000 CD player. He now uses the Yamaha as a transport, initially into this M1 and now into the TriVista.

I’ve extensively improved this DAC and she performs very well indeed, far better than stock, which is already very good. Check out all the details.

You get premium DAC punch with this improved M1, plus a contemporary DAC chip and balanced output for a very reasonable price.

Get in touch for more details.

img 3204

img 1318  img 1182

img 1181

img 1189
Yep, I replaced all these parts with premium new ones.

Here is your chance to own a very rare, extensively upgraded Musical Fidelity Tri-Vista 21 Tube DAC, in pristine, unmarked condition. Priced @ just $1595.

UPDATE – SOLD!

img 8086

In many ways an end-game product when it was designed, very few CD players or DACs for that matter are built like this beast. Make no mistake, this is a very serious DAC. MF made only 1500 of these, and this Tri-Vista 21 comes from my personal collection.

The Tri-Vista 21 weighs more than most amplifiers, has a massive power supply, built-in choke filtering of the mains and circuitry and engineering that would shame most $10,000 DACs and CD players.

This is a late production unit, numbered 1419/1500.

Specifications, courtesy of Musical Fidelity

DAC architecture: 24-bit Delta-Sigma (Bitstream), dual-differential, 8 times oversampling, 96/192kHz switchable
Sampling frequencies: 8 to 108kHz
Data types: 16, 20, 24 bit word lengths
Inputs: RCA 75W, S/PDIF, TOSLINK optical
Outputs: RCA left and right analog audio, RCA digital loop out
Output impedance: 50 Ohms
Frequency response: 10Hz to 20kHz ± 0.0dB
Signal/noise ratio: 114dB “A”- weighted
Total harmonic distortion: < 0.0025% 10Hz to 20kHz
Total correlated jitter: < 135pS
Channel separation: < 109dB 20Hz to 20kHz
Linearity: < 0.2dB down to -100dB
Audio output at digital 0dB level: 2.17 Volts RMS at 1kHz nominal
Power requirements: 100, 115 or 230Volts AC 50/60Hz, 30 Watts
Dimensions: 440mm wide, 105mm high, 375mm deep
Weight: 13.15kg, 29lbs, unit only

Features

The Tri-Vista 21 is an extraordinary DAC, upsampling all digital signals to either 96kHz or 192kHz. It features a very impressive class-A 5703 miniature triode tube output stage and superb 13.5kg battleship-like construction. Seriously, I’ve never seen or worked on a DAC that’s better built.

The feet glow red at first, then amber and finally blue to indicate that the unit is fully warmed up and sounding at its best.

Upgrades

Where do I start? I’ve installed a new, matched set of 5703 output tubes, new socketed op-amps, new laboratory-grade electrolytic capacitors, new Siemens mil-spec decoupling capacitors, ERO  coupling capacitors, CMC silver RCA connectors and more. Literally, dozens and dozens of premium parts from my stock went straight into this DAC!

_DSC6767

IMG_2117.JPG

IMG_2119.JPG
My attention to detail is so painful that I didn’t just replace these 5703 tubes, I installed a matched set, and also removed and replaced all the little grommets that hold them in place.

More Information

Check out my video and article and to find out about the extensive modifications I’ve made to this unit. Suffice it to say that this would have to be the best sounding Tri-Vista 21 out there, and this was already an extraordinary DAC.

As always, this unit is immaculate, in virtually unmarked, pristine condition. The value of parts and modifications alone is around $1000. Fully-insured shipping to anywhere is available, using Pack and Send.

Priced to sell at just $1595, don’t miss this opportunity to own this rare and legendary upgraded Tri-Vista 21 Upsampling Tube DAC.

img 8081
The fascia and chassis of this legendary upsampling DAC are virtually unmarked.

img 8083

img 8078

img 8088

img 8085

img 8087
Here you can see just a few of the dozens and dozens of premium new parts, including new 5703 output tubes, ERO coupling capacitors and Siemens decoupling capacitors.
img 8084
Silver CMC output connectors make a useful difference and are far ahead of the standard Neutrik parts.

NOS Technics SE-9060 Power Amplifier – $995!

UPDATE: Sold!

Look at this gorgeous, new old stock – yes that’s right NOS, Technics SE-9060 power amplifier. These are incredibly well-made amplifiers, from Technics professional series in the late 1970s.

img 3180

This amplifier is heavy and comes with original box, manual and accessories. Yes, this is genuinely new old stock. I could scarcely believe it myself until I opened the box and examined the amplifier.

This is a very fast amplifier, has lovely die-cast heatsinks, completely dual-mono design and power output of 70 Watts per channel, or 180 Watts in bridged mono. Two of these would be absolutely awesome. Lots more info can be found at Hifi Engine.

This SE-9060 is perfect in every way. I’ve given her a once over including all amplifier internal adjustments and testing, to make sure everything works perfectly. I’ve worked on a few of these over the years, they are superbly well-made.

The headphone amplifier sounds incredible, easily one of the best sounding headphone amps I’ve heard with my Sennheiser HD-600’s.

Note, this is a US unit, running off 120V. This would suit my North American readers, and I have a premium, high capacity step down transformer available for potential local customers of this unit. Insured shipping is available through Pack & Send.

img 3178
Dual mono layout, with incredibly useful and killer sounding headphone socket on the front panel.
img 3179
WOW, this thing is simply incredible, but then again, it is new old stock, so it should be.

img 3181

img 3185
One pair of output devices per channel – just about the simplest arrangement possible.

img 3184

img 3187

img 3183

img 3190

img 3191
This new Tortech (Australian, not Chinese rubbish) 500 Watt transformer is available to suit, ask me about this if interested.

Musical Fidelity M1 – Upgraded by Liquid Audio – $595

UPDATE – SOLD!

Next, we have this lovely Musical Fidelity M1 DAC. There’s not much to say that hasn’t already been said about these great little DACs.

I’ve extensively improved this particular unit and she performs very well indeed, far better than stock, which is already very good. Check out all the details.

You get premium DAC punch with this improved M1, and a contemporary DAC chip, for a very reasonable price. I spent hours on her and installed a lot of nice parts and she’s now ready for a new home.

Get in touch for more details.

img 3204

img 1318  img 1182

img 1181

img 1189
Yep, I replaced all these parts with premium new ones.

Just in, this very cool NAD 6240 cassette deck, with Dolby B/C, adjustable bias and playback trim.

UPDATE: Sold to BeBe!

I’ve just serviced this lovely NAD 6240 and she is running nicely. Service included lubrication of critical gears and pulleys, cleaning the heads, capstan and pinch roller, demagnetizing the record/playback head, head azimuth adjustment, playback levels and meter adjustment. Yes, I have test tapes and equipment for doing this work on cassette decks!

The NAD 6240 would perfect deck for those wanting to play their tapes again perhaps, or buying their first proper tape machine. Tapes are right back in vogue now and she’s looking for a new home.

Complete with original owners manual, just $135.

img 1599

img 1602

img 1603

img 1601

img 1610 1


This superb subwoofer, built by yours truly, is also for sale. Just $695.

UPDATE: Sold!!

This is a sealed subwoofer utilising several excellent design elements. Firstly, the enclosure is made from 25mm MDF, so it’s extremely solid. This sub is essentially inert.

IMG 3527

Secondly, it uses the outstanding Peerless XLS 12 long-stroke subwoofer driver. This was an audiophile-grade subwoofer driver used in many of the top subs from a few years ago.

IMG 3525

Finally, it uses a very reliable, 200 watt RMS, Australian-made Redgum MOSFET linear amplifier. This is an excellent plate amp and has been so popular, it’s still made by Redgum. It’s never missed a beat.

IMG 3526

IMG 3529

This is an awesome sounding sub, punching out deep, clean bass only possible with a sealed design like this. I used the sub for many years before passing it on to a friend of mine.

A commercial design approaching this level of build quality and performance would be well over 2K. Finished in Jarrah veneer, she’s for sale and looking for a good new home. Asking $695.


Lovely Pioneer F-402 AM/FM stereo tuner.

SOLD… Already!

Newly listed for sale, this is a proper analog band stereo tuner, so you get uncompressed audio, not MP3 files as you do with DAB. It’s digital in operation though, so you can store stations in memory and access them from the push of a button.

In like new condition, comes complete with original owner’s manual. Priced at $135.

img 1593

img 1594

img 1598

img 1597

img 1596

img 1595


TEAC PX-300 direct drive turntable

UPDATE – SOLD!

The PX-300 is a solid, proper made-in-Japan deck. The deck features a heavy, machined platter, stroboscopic speed indication and a Japanese Audio Technica cartridge. She also has speed control fine-tuning and a thick, high-quality original factory platter mat.

I’ve just completed a full service on her and replaced the power cord, lead-out cable and installed a new stylus. This deck is ready for a new home and should be a reliable player for many years to come.

Great buying at just $350.

img 9269

img 9273

img 9276

img 9278

img 9279

img 9280


Marantz CD-52 Mark 2 CD player

UPDATE: SOLD!

The Marantz CD-52 Mark 2 was one of the most widely acclaimed players at its price point. The CD-52 mark 2 was on sale from around 1993, following the huge success of the original CD-52. The mark 2 iteration featured Elna Silmic and Cerafine capacitors in critical areas and sounded quite a bit nicer than the original 52.

Like all older players, this one is made better than anything affordable now and uses a highly reliable, classic Philips transport. The player would make a perfect transport or second deck. I’ve just serviced, lubricated her, and cleaned the laser optics. She is yours for just $250.

img 9867

img 9866

img 9865

img 9864


Check out this stunning Ortofon MC Rohmann statement moving coil cartridge.

Like new, with box and papers, but sadly missing stylus and cantilever after a cleaning mishap.

UPDATE – SOLD!

This superb moving coil cartridge can be rebuilt by Ortofon, Soundsmith and probably Garrott Bros. Priced at $195, bear in mind, something equivalent new will cost at least 2k, while a Soundsmith repair on this will be maybe $500…

This was a premium cartridge from Ortofon, built to celebrate Ortofon’s former managing director. The cartridge body is milled from a solid block of aluminium and the dark blue anodized body exploits aluminium’s special damping characteristics to suppress resonance. The Nude Orto-Line diamond ensures flawless tracking of even the most dynamic passages.

MC Rohmann conveys the full range of detail and subtle nuance, even when a powerful brass section competes with the fine nuances of quieter instruments such as the flute or harpsichord. Recommended load: 100 Ohms or more.

Output voltage at 1000 Hz, 5cm/sec.  –  0,25 mV
Channel balance at 1 kHz  –  < 1,5 dB
Channel separation at 1 kHz  –  > 25 dB
Channel separation at 15 kHz  –  > 15 dB
Frequency range at – 3dB  –  20-55.000 Hz
Frequency response –   20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force  –   80 µm
Compliance, dynamic, lateral  –  12 µm/mN
Stylus type –  Nude “Orto Line”
Stylus tip radius  –  r/R 4,5/100 µm
Tracking force range  –  2,2-2,7 g (22-27 mN)
Tracking force, recommended  –  2,5 g (25 mN)
Vertical Tracking angle  –  20°
Internal impedance, DC resistance  –  6 Ohm
Recommended load impedance  –  > 10 Ohm
Body material   –  Aluminium, milled from solid block
Colour  –  Royal blue
Weight  –  9 g

img 9969

img 9970

img 9971

img 9972

img 9973

img 9974


How about this lovely Denon DL-103R moving coil cartridge.

UPDATE – SOLD!

This cartridge features very low usage (approximately 20 hours) and presents like new, with box and papers.

Current retail on these is $449USD. This near-perfect example can be yours for just $295AUD.

“This true classic, which has been in production since I got into this hobby in the mid-70s, must be counted among audio’s most remarkable values.”

Stereophile Recommended Component 2010, 2011, 2012, 2013, 2014, 2015.

img 9958

Denon DL-103R Phono Cartridge Specifications:
– Type: Moving coil
– Output voltage: 0.25mV
– Frequency response: 20Hz-45kHz
– Output impedance: 14 ohms
– Channel balance @ 1kHz: < 1db
– Channel separation @ 1kHz: 25dB
– Stylus tip: 0.02 mm special round solid diamond
– Compliance: 5 x 10-6 cm/dyne
– Recommended tracking force: 2.5 +/- 0.3g
– Colour: Black
– Weight: 8.5 g
– Recommended load resistance: 100 ohms or more

img 9959

img 9960

img 9961

img 9964

img 9963


New for sale, this gorgeous, fully serviced and set-up vintage Rotel RP-3000 direct drive turntable.

It comes complete with legendary SME 3009 Series 2 tonearm and Rega Bias MM cartridge, for just $995.

UPDATE: SOLD!

Now I’m surprised this hasn’t sold yet. I’m guessing that most simply aren’t aware that just the SME tonearm alone on this great deck is worth $600 – $800, if you want to go and buy one now on eBay! This deck punches way above its weight and nothing at this price new would hold a candle to it.

This stunning, vintage Rotel RP-3000 is finished in real wood veneer and has some great features. The Rotel RP-3000 is a 2-speed, manual control, direct-drive turntable system with pitch control. It also has a useful built-in spirit level, which allows you to get your deck perfectly level, using the adjustable feet, or shims under the feet which I prefer.

The deck itself is beautiful, with smoked acrylic lid and real walnut finish. When you add in the legendary SME 3009 S2 Improved tonearm, worth $600 or more, and a lovely low-hours Rega Bias MM cartridge, you have a killer deck.

This is ideal for anyone wanting their first proper turntable, or someone perhaps upgrading from a belt-drive or inferior DD machine.

img 8452

img 8454

Naturally, I’ve performed the tedious multi-step set-up process for you, saving you time and money. This includes setting tracking force, anti-skate, lateral balance, arm ride height, arm alignment, and cartridge alignment. I’ve also recently serviced the turntable.

This awesome vintage turntable setup sounds absolutely amazing and is looking for a good home. If interested, get in touch!

Specifications (Courtesy of the Vinyl Engine)

Motor: pulse determinant AC servo motor
Drive: direct-drive
Speeds: 33 and 45rpm
Speed control range: +-5%
Wow and flutter: 0.05% WRMS
Signal to noise ratio: better than 60dB
Platter: 310mm, full-size, aluminium die-cast, strobe on rim
Tonearm: SME static-balanced, j-shaped pipe arm, oil-damped cueing device, direct-readout stylus gauge counterweight, anti-skating device, arm height adjusting device
Length: 230mm
Overhang: 12mm, with variable overhang slider tonearm base
Cartridge weight range: 4 to 14g
Dimensions: 470 x 350 x 190mm
Weight: 8.2kg (220/240V)

img 8455

img 8457 2

img 8456 2

img 8440 1

Page 1Page 3

%d bloggers like this: