Workshop

img 1592

Thanks for visiting the workshop!

These are some of the latest pieces of customer equipment I’ve worked on. Take a look, maybe yours is here..?!


Jan 2023

October 2022

img 3172
Wow! I’ve just acquired this stunning, one-owner Sansui G-8000 monster receiver. She’s in the workshop now being refreshed, repaired, serviced and will shortly be for sale.
img 2944
She’s back!! My wonderful old Krell KSA-150 sold back in 2017, is now owned by a customer and good friend of mine and she’s back here for service. Who knows, maybe she’ll slot back into my system again…?!
img 2949

 September 2022

img 2929
img 2693
img 2889
img 2667
img 2598
img 2612
img 2879
img 2803
img 2653
img 2771

 

July 2021

img 4654
img 5050
img 2967
img 4620

March 2021

img 2551 1

 

January 2021

img 1854
img 2313
img 7889

October 2020

img 9722
img 1379
img 1654
img 1721
img 9127
img 1342

 

June 2020

img 9401
img 9444
img 9438
img 9445
img 9425

May 2020

img 8923
Wow, an ME 1400, beast of a power amplifier!
img 8916
img 8920
img 8891
img 8835

Yes, this really IS a Sansui AU-X1!

img 8717
img 8719

April 2020

img 8650
img 8658
img 8659
img 8661
img 8553
img 8551
img 8548
img 8446

Lots of VFET gear @ Liquid Audio including this gorgeous Yamaha B-2 power amplifier and a lovely Sony TA-8650 integrated amplifier.

img 8380 1
img 8379 1
img 8231

Lots of dead VFETs too, unfortunately…

img 8232

March 2020

img 8190
img 8115
img 8118
img 8183
img 8170

February 2020

img 7844

img 7855

img 7719

img 7718

img 7688

January 2020

img 7672
img 7647
img 7648
img 7636
img 7628
img 7625
img 7503
img 7557
img 7558
img 7514
img 7599
img 7601
img 7497

November 2019

img 6712
img 6718
img 6639
img 6722
img 6671
img 6562
img 6526
img 6624
img 6791
img 6809

June 2019

img 4872
img 4808
img 4948
img 4933
img 5007
img 4517
img 3485
img 3483
img 4348 1
img 3896

December 2018

The Luxman L-550 Class A integrated amplifier is one of the best sounding integrated amps ever made. These two gorgeous Luxman L-550s are here with me for overhaul and repair and will then be sold. If you are interested, let me know, these are highly sought after and will not last!

img 2654

November 2018

img 2592
img 2594
img 2437
img 1396
img 1376

October 2018

img 1665
img 1672
img 1577
img 1576
img 1573
img 1572
img 1560
img 1522
img 1497
img 1495
img 1488
img 1487

September 2018

So sorry for the lack of updates on this page. I’ve somewhat let this page go over time, I’ll have a think about what to do with it, but in the meantime, here’s some of the latest stuff!

img 1250
img 1245
img 1264
img 1265
img 1370
img 1376
img 1337
img 1336
m1dac
Inked M1 DAC open
img 0907 1
img 0905 1
img 0915
img 0911
img 0955
img 0943
img 7096
img 7106
img 6756
img 6759
img 0037
img 0009

May 2018

img 9891
img 9920
img 9921
img 9925
img 9917
img 9838
Gorgeous – an Accuphase T-105 tuner and Sony TA-8650 VFET monster!
img 9812
img 9524
img 9832
WOW – doing some work on this epic Luxman PD-350 for a customer of mine. Look at the stunning Koestu arm and cart – that is some combo.
img 9833
img 9818
And yes, the legendary Stax CA-X Professional. Best solid-state preamp ever made…?
img 9824
img 9699
img 9686
img 9677
img 9666
img 9637
img 9592
img 9528

March 2018

img 9291
img 9257
img 9253
img 8776
img 9160

January 2018

img 8689
img 8049
img 8292

December 2017

img 8415 1
img 8421 1
img 8431
img 8388 1
img 8418 1
img 8440 1
img 8174
img 8156
img 8142
img 8141
img 8123
img 8115

November 2017

img 7667 1
img 7686
img 7693 e1512537482179
img 7716
img 7858

April 2017

On the bench now or recently include a Krell KSA100S, Rogue audio Sphinx integrated, two Accuphase M-60 monoblock amplifiers, two stunning Marantz integrated amps – a PM-6 and a PM-8, Denon DP-62L DD turntable, Krell KAV150, Technics SE-9060 power amp, an amazing Technics ST-9600 tuner, Sansui BA-F1 and CA-F1 pre and power amps, Technics SL-1200 and SL-1600 turntables and many more.

img 6156
img 6158
img 6212 1
img 6223
img 6260
img 6269
img 6317
img 6352
img 6354

March 2017

Things have been nuts since taking Liquid Audio full time! I’ve had so much amazing gear in for service and repair, and some lovely new customers, which is great! Here are a few pics, details to follow!

img 5758 1
img 5766 1
img 5788
img 5791
img 5797
img 5798
img 5823
img 5824
img 5827
img 5828

January 2017

Just in and on the bench, a spectacular Kenwood L-1000 complete system, including L-1000M power amplifier, L-1000C preamplifier, L-1000T FM stereo tuner and L-1000D CD player!

IMG 4693
IMG 4695
IMG 4697
IMG 4698

Also just serviced, a lovely Sony TA-F530ES integrated amplifier. This was playing up and she is now working perfectly!

IMG 4717
IMG 4720
IMG 4719

Also working on various other great gear including a few turntables:

IMG 4673
IMG 4670
IMG 4680

img 4673And just finished servicing a gorgeous Sansui AU-719!

IMG 3949
IMG 3953
IMG 3958
IMG 3967
IMG 3969

September 2016

img_4282
IMG 4225
IMG 4226
IMG 3990
IMG 3984
IMG 3986

May 2016

I’ve been busy! Just finished servicing a Technics SL-1200 mark 5 and a Denon DP-1200, both gorgeous direct drive turntables that you really need to look out for if you are in the market for a properly engineered deck. I’ve also been servicing a gorgeous old Sansui AU-719 integrated amplifier – some pics below!

IMG_3904
IMG_3900
IMG_3892
IMG_3896

February 2016

Well, there are already several items on the bench including a couple of turntables. I have a lovely old Kenwood KD-500 with SME 3009 tonearm in for service, plus a couple of other items.

IMG_3673

December 2015

Another swag of different gear on the bench this month, including a monster receiver – this time a Sansui G-8000 beast, plus various turntables, a few Regas, several nice direct drive models and a couple with SME tonearms, which I always love working on…!

IMG_3226
IMG_3214
IMG_3208

November 2015

I’m restoring my wonderful old Roland CR-8000 drum machine. More specifically, I’m repairing the dreaded ALPS push-buttons, more details soon…

IMG_3233-0
IMG_3248
IMG_3247
IMG_3271

October 2015

Lots on the bench, in fact, it’s keeping me from updating what’s actually on the bench – an interesting dilemma! I’m working on a Rega Planar 3, installing a new premium white Rega belt and Ortofon cartridge, servicing a Harman Kardon T-20 turntable and fitting a new cartridge to that deck also, repairing a JVC direct drive turntable, working on a gorgeous matching Kenwood DP-3300 CD player and KT-3300D tuner – that one is getting a full alignment, plus restoring a Musical Fidelity A-100X which had needed a fair bit of work…

July 2015

Well, folks, I’ve been hard at work fixing numerous turntables. The work is endless at the moment, with the resurgence in vinyl still gathering momentum as youngsters discover analog warmth for the first time. I will add images as I get the chance.

May 2015

Hi everyone, I’m putting a temporary hold on new repairs and restorations, to leave me the time I need to restore two Krell amplifiers. The first is a KSA-100s, the second is its big brother, the beautiful KSA-200S. Both are legendary amplifiers and require extensive restoration work to bring them back from the dead. This will, of course, be fully documented.

Having said that, I’ve just finished multiple turntable services, pics below!

IMG_2748
IMG_2625
IMG_2624
IMG_2625
Dual 1228
Dual 1228

April 2015

With all the Technics SL-1200s repaired it is time to look at the Luxman amplifier and tuner. Just about finished on the amp and just a service left to do now on the tuner. That will just about clear the bench for the next big project – the restoration of a beautiful Krell KSA-200S! More on that soon…

It’s Technics SL-1200 weekend this weekend. I have three can you believe Technics SL-1200’s here, all needing service. With two of the decks, I’m fitting nice new Ortofon 2M Red moving magnet cartridges to replace the old Stanton DJ carts currently installed in both decks.

IMG 2471
IMG 2478

I’ve also got a very old Garrard turntable to service and a Pioneer direct-drive deck which looks to be in nice condition and quite serviceable. I’m also preparing some items for sale, including a very cool Pioneer AM/FM stereo tuner and a lovely little Marantz integrated amplifier with all the fruit including a phono preamp built-in. More news and images of these on my Audio Gear for Sale page, when they are ready to go.

Finally, also on the bench shortly is a cool little Luxman amplifier and tuner combination. Both of these items require service and repair, so it will be interesting to see if we can save them.

IMG 1068
IMG 1069
IMG 1070

Update – the Marantz work is now complete! Currently working through replacement of capacitors in the Marantz SM-80. The traces on these boards lift if you even look at them. To give you an idea, I rarely lift traces. I use a Hakko soldering station and you can very precisely set the temperature to suit the work you are doing. Even set as cool as I can work with, traces lift on the SM-80 board. Anyway, will persevere and hopefully resolve all of the issues with this amp and give it a new lease on life in the process. Sometimes jobs are like this!

IMG 2370
IMG 2372

Just started on this lovely Marantz pre/power combo – the classic SC-80 and SM-80. Both have been with their original owner since new and are pristine except for some rather poorly executed previous working the preamp and a fault in the phono pre section of the circuit. You can see the signs in the charred resistor and transistor in the third image.

IMG 2337
IMG 2339
IMG 2342

Another recent job was to restore the mainboard and service my Accuphase C-202 class-A preamplifier. The job is documented here.

IMG_0632.JPG
_DSC6633
Typical Accuphase – lots of DC offset trimmers, quality semiconductors, lots of heat sinks and large reservoir capacitance, right where it’s needed.

March 2015

I am currently working on a cool JVC QL-F4 direct-drive turntable that was playing up a little. I have refurbished the power supply and variously cleaned and lubed the deck. I’ve also finished the Tri-Vista DAC and it sounds sublime.

IMG 2270
IMG 2272
IMG 2116

I have several turntables here for work, plus I’ve been finalizing mods on my Musical Fidelity Tri-Vista 21 Class A Tube DAC.

IMG 21653
IMG 2119

February 2015

I’ve been working on lots of great audio equipment and that’s not left me with enough time to update my website!

I’ve just serviced a wonderful – no make that two wonderful Kenwood D-3300P CD players! These are built like a tank, seriously, these players are made in a way only Accuphase and a handful of others still are. My customer owns three of these superb players.

I’ve fixed numerous turntables, fitted lots of new styli, fitted some new cartridges, adjusted many tone-arms, changed many belts and lubricated many spindle bearings.

_DSC6737
_DSC6734
IMG_2132.JPG
IMG_2130.JPG

November 2014

Nearly finished the Luxman M-4000A amplifier and its matching partner, the equally rare C-5000A preamplifier. Both needed extensive cleaning and restoration and many new capacitors. I will update this with photos shortly, but I have posted about the Luxman M-4000A resto here.

I have also just finished working on a lovely Marantz CD-63SE KI Sig CD player. This one wasn’t reading discs properly and a couple of quick tests showed laser power output to be weak. I tweaked this up and restored the player’s ability to read discs, but have ordered a new laser and mech to be on the safe side and will fit this once it arrives.

Also just completed is my service on a lovely original Rega Planar 3. This particular deck needed a full service, new bearing oil, new motor drive capacitor and new Rega upgraded white drive belt.

October 2014

In the middle of restoring a gorgeous Luxman M-4000A

IMG_0335.JPG
These are so lovely to work on, all removable cards that plug into a backplane, like test gear. Nice.
_DSC6487
What a lovely old girl

You can read more about the Luxman M-4000A amplifier restoration here.

Just in is a lovely, original Rega P3 which I will service and set up after sitting in storage for three years. These older Rega decks at from the period where the company produced some quality gear. No MDF platters to be found here!

Also here is a nice Marantz CD-63 SE Ken Ishiwata edition. These players are still good today but typically suffer from power supply regulator issues and lasers can be weak after this many years also. I will inspect this player and hopefully, she can be repaired.

_DSC6584
Hi-fi porn – Marantz HDAM discrete output buffer modules, under copper shielding cans. Nice cans!!

September 2014 – audio gear currently or recently on the bench, at Liquid Audio.

Fresh on the bench is a mammoth Pioneer SX-1250 monster receiver. This beast of a receiver needs a power supply restoration after one of the main filter capacitors spewed its guts out of the vent-hole. Each of these capacitors is very big and expensive, but well worth repairing in a beast of this quality.

Pioneer+SX-1250.preview.jpg
IMG_0333.JPG
New computer-grade Nippon Chemi-Con caps on the left, old NC caps on the right. Note the massive size difference and remember that the new smaller caps are considerably larger!

I have just finished working on a very nice example of a Krell KSA-150 class A power amplifier.

Many of you will have already watched my restoration video on one of these beasts and in fact, the video has generated a great deal of interest. This recent example came to me as a result of my customer having watched my restoration video.

A big, powerful (over 1kW, continuous, per channel into 1 ohm, and no, I am not joking) power amp such as the Krell needs to be inspected and serviced at regular intervals. The reason for this is largely related to the prodigious heat they generate. This heat kills capacitors. Krell also modified the protection relay driver circuitry over the years the amp was made, to reduce the heat-related failure of parts on the front protection PCB.

This particular KSA-150 was in excellent condition, but my customer wisely decided an inspection and service were in order before flicking the switch here on local 250VAC. My customer was fairly sure that the amp was a local unit but the backplate actually specified 110VAC which indicated that it wasn’t. The safest bet was for me to simply open the chassis and inspect the line voltage configuration. In fact, this amp was set for 240V, which is as close as we can get to being correct.

My next job was to test the DC offset that might be present at the loudspeaker terminals. Thankfully, the DC servo circuit in this KSA-150 was operating correctly and there was almost zero measurable DC at the outputs, another very good sign.

My last job was to check to see whether the amp had in fact been restored previously as my customer had been told. A careful inspection revealed many, but not all, of the caps had been replaced. The caps that had been changed were replaced with high-quality Nichicon types and the work had been performed correctly, with the right attention to detail, so this was a good result. In the end, I was able to give this KSA-150 a clean bill of health.

IMG_0265-0.JPG
The iconic heart of the KSA-150, a massive potted toroidal transformer

May 2014 – Audio gear currently on the bench at Liquid Audio

Just completed a full inspection and service of a lovely Denon DP-1200 direct drive turntable. My customer also needed a new cartridge and this is a funny story.

The Denon DP-1200 was given to my customer, broken. It was going to be thrown out because it didn’t play a record. It couldn’t have! Upon inspection, I was able to inform my customer that there was no cantilever or stylus! They’d snapped clean off at some time previously, a shame as the Supex moving coil cartridge was a good one.

Anyway, the deck also wouldn’t hold a speed correctly. In fact, my customer found the deck didn’t work or only worked intermittently. After removing the bottom, I found the mains transformer was hanging by just one bolt. The other fasteners were luckily still sitting in the bottom cover. After reattaching the transformer and cleaning the main speed control pot, and the board level speed trimpot, the deck came back to life.

I installed an Ortofon moving magnet cartridge and carefully set up the cartridge and tonearm after doing a little more miscellaneous servicing and I’m happy to say the deck came up beautifully. Have a look at some pics…

20140512-092429.jpg
They look good from just about any angle
20140512-092504.jpg
IMG_0299.JPG
Always cool, the Denon DP-1200 direct drive turntable

April 2014

Sansui AU-717 before and after cleaning – note that the after cleaning shots were before parts replacement – she looks even better now!

_DSC5914
Nasty dust and dirt covering everything!
_DSC5912
I’m testing something here prior to cleaning and disassembly, looks like standing current or ‘bias’
_DSC5911
Dirty main filter capacitors clean main filter capacitors!
_DSC6021
_DSC6021
CLEAN main filter capacitors!

March 2014: The Sansui AU-717 integrated amp restoration and repair is finished.

Read about it here!

I completed the power supply/protection board and refitted it last night. My last job was to restore the power amp modules as they contained some corrosive glue and a couple of caps were showing signs of heat damage. Last night I removed both modules and reworked the boards, replacing all electrolytic caps on each board, reworking a few dry joints and flux cleaning each board as is my standard practice. Once completed, I reassembled both modules and tightened all semiconductor fixings.

This morning I reassembled the wiring and plugged everything back together, then powered her up on the variac. I use a variac whenever it is important to gradually bring a circuit up to voltage. this might be for gear that has not has mains voltage across it for years, or for situations like this where you have changed many parts, and you want to be sure that nothing is drawing too much current.

Thankfully, care in the restoration process paid off and I hadn’t goofed anywhere! She came up to power beautifully, with no smoke, DC rails were restored and correct, protection turned off after the required ten seconds, and I was then able to let her sit for a while. I readjusted bias and offset and then listen to some tunes – she was working perfectly!

_DSC5988
The finished power supply/protection board. Note the nice new high-temp, low ESR Panasonic capacitors I’ve used here – the best you can buy for sensible money.

The Sansui AU-717 is coming along nicely. I have pulled the power supply and protection board because there were no +/- 33V rails present. I had previously replaced the faulty protection relay and have full output from the power amp stages now but there is more that needs work here.

This board shows serious signs of glue cancer. Several large electrolytic caps almost fell off the board and a couple of others exhibited very corroded leads. This is due to the nasty glue Sansui used to secure large components in all its products from this era. The glue gradually eats away at the legs of parts until they eventually fail, as has happened here.

I will replace all the electrolytic caps on this board and a couple of other parts as well, and remove the evil glue. That will restore the intermediate voltage rails, which then should restore full functionality to this great old amp.

_DSC5982
These capacitors have to go…
_DSC5983

I am currently working on a Sansui AU-717. This lovely old amp is in for restoration and I have made good progress on the output board including testing and setting bias and DC offset. I am now waiting on a new protection relay which was faulty.

Sansui AU-717
Sansui AU-717
That looks better!
Scroll to Top